Geekvape AP2 (Aegis Pod 2) Kit 900mAh

Introduction about Geek vape AP2 (Aegis Pod 2) Kit 900mAh:

The Geekvape AP2 Kit is one of the smallest and tough tri-proof pods vapes with an adjustable airflow mechanism. This is done by adjusting the airflow by inserting the pod in a different direction. This kit is waterproof, dust-proof and shock-resistant characteristics with an integrated battery capacity of 900mAh. The Geekvape AP2 Kit was introduced with triple proof function and is made up of a metallic shell that works as a protection shield against shocks and scratches. The users can switch MTL and DRL vaping in several directions. You can choose from green camo, red camo, grey camo, blue camo, rainbow, red and black.

Different operating parts of Geekvape AP2 Kit :

Geekvape AP2 Kit is operated with several buttons, such as one button, which functions with a safety lock control, power-bottom, bottom-firing and 3-level output adjustments. It has three output settings, a side fill system and a durable waterproof design with a 4.5ml leak-proof pod.

Setting your pod with a small hole to match the device’s air inlet allows increased airflow, resulting in an MTL session; otherwise, you’ll get an RDL vape. One bottom controls the AP2, which has safety-lock control, bottom-firing, power bottom, and three-level output adjustment.

When the logo flashes in white-blue-green order, it signifies your button is locked up. Switch the bottom 5 times to invigorate safety-lock mode. The LED indication can remind you of the battery level if you press three times to switch 3-level output adjustments. It can also adjust the output level to suit your vaping preferences irrespective of low, medium or high level.

Specifications:

1. Battery Capacity: Geekvape AP2 Kitcomes with a long-lasting Built-in 900mAh battery that serves longer than its predecessor irrespective of MTL or RDL.
2. E-juice Capacity: The vape juice in this new kit is kept in a 4.5mL

Geekvape AP2 pod Cartridge,magnetically attached to the mod. This pod is leak-proof, with a side-fill opening that makes refilling the reservoir quite simple.

3. Filling Type: As the cartridge is attached to the mod, it comes with a leak-proof Side filling port.
4. Coil Resistance: The AP2 employs the same G Series coils as its predecessor, which come in six different resistance settings. With your order, you’ll receive a 0.8ohm coil for those fires between 12 and 15 watts, as well as a 0.6ohm coil for those fires between 13 and 18 watts.
5. Charging Type: A Type-C USB connector on the bottom allows quick recharging with the provided cable. The power consumption is 5 volts.
6. Power: The power consumption is Low/Med/High label
7. Longest Vaping Time: 10s
8. PCBA Temperature Alarm: ＞80℃
9. Working Temperature: ﹣10-45℃
10. Low Voltage Warning: 3.2V±0.1V
11. Standby Current: ≤15uA

List of Features:

• New tri-proof, new Aegis Pod:

The Geekvape AP2 Kit comes with a new tri-proof vape pod, in which you can adjust the airflow.

• Innovative adjustable airflow setting (for MTL & RDL):

In this kit, the airflow can be adjusted by inserting the pod in different directions, both for MTL and RDL vape.

• Upgraded leak-proof cartridge:

With a leak-proof cartridge and side filling facility, you can experience a better vape.

• Built-in 900mAh battery capacity:

Geekvape AP2 Kit has a long-lasting battery power that serves long. It has a built-in capacity of 900mAh

• 5ml cartridge with leak-proof mechanism:

The cartridge is filled with 4.5ml juice that is kept with leak-proof mechanisms.

• Features upgraded metallic shell:

The AP2 is also the toughest and most portable pod kit in the vape store and features an enhanced design for better durability thanks to a new metallic shell.

• Compatible with Geekvape G series coil:

The Geekvape AP2 Kit is equipped with the same G Series coils as its predecessor, with six distinct configurations.

• Multi-use button for 3-level output adjustment and safety-lock mode:

The control side surface, which is equipped with a button that is used in multiple ways that fire the pod and allow you to modify the output to any of the three possible settings, is located on the front of the device. This button must be pressed five times in order to activate the safety mode and three presses to adjust the output of the voltage.